Galvanised octagonal MV line poles — 8 to 14 m
Reference: PO-HTA-8-14
Illustration created for MWB. Configuration and dimensions depend on the selected specification.
At a glance
Octagonal steel supports for medium-voltage distribution, for installation without a base plate, with crossarm and earthing interfaces.
- Shaft section
- Octagonal
- Material and protection
- Hot-dip galvanised steel
- Overall height H
- 8 to 14 m
- Crossarm attachment
- 2 holes Ø 18 mm
Price, packaging and lead time confirmed for your quantity and destination.
View my selection and send the enquiry ↗The product in detail
This pole range is intended for overhead medium-voltage distribution. The hot-dip galvanised octagonal shaft supports the crossarms selected for straight runs, changes of direction or anchoring, subject to load verification.
Documented overall heights range from 8 to 14 m. Standard features include two 18 mm crossarm holes, an M10 earthing nut, a top cap and identification of height and year of manufacture.
Final selection combines above-ground height, top loads, crossarms and foundation. The installation depths in the variants are the range table values; the foundation and soil still require project verification. Insulators and conductors are selected separately.
Applications
- Overhead medium-voltage distribution
- Network extensions and replacement
- Straight-run or anchoring supports as designed
For a tailored quotation
Provide network voltage, spans, conductors, required loads, above-ground height, crossarm type, wind and soil data, quantity and destination.
Contact our team ↗Specifications
| Reference | PO-HTA-8-14 |
|---|---|
| Shaft section | Octagonal |
| Material and protection | Hot-dip galvanised steel |
| Overall height H | 8 to 14 m |
| Crossarm attachment | 2 holes Ø 18 mm |
| Earthing | M10 nut |
| Top closure | Plastic top cap |
| Installation | Without base plate; embedded lower section |
| Identification | Height and year of manufacture |
| Permissible load | Confirm for the selected height and load class |
References and variants
Compare dimensions and configurations, then choose the variant for your quotation.
7 variants
| Reference / variant | Specifications | Quotation |
|---|---|---|
| H = 8 m | Above ground: 6.7 m · embedment: 1.3 m | |
| H = 9 m | Above ground: 7.6 m · embedment: 1.4 m | |
| H = 10 m | Above ground: 8.5 m · embedment: 1.5 m | |
| H = 11 m | Above ground: 9.4 m · embedment: 1.6 m | |
| H = 12 m | Above ground: 10.3 m · embedment: 1.7 m | |
| H = 13 m | Above ground: 11.2 m · embedment: 1.8 m | |
| H = 14 m | Above ground: 12.1 m · embedment: 1.9 m |
MWB selection sheets
Open documents in a reading window without leaving this page.