Your sourcing partner from Tunisia WhatsApp : +216 28 554 555
MWB TRADING · SOURCING FROM TUNISIA

Single-layer and glass-fibre PPR pipes from Tunisia

Compare PPR pipe references by outside diameter, SDR and single-layer or glass-fibre reinforced construction. State total pipe length, required straight lengths and application for a quotation from Tunisia matched to the specified water network.

108 catalogue references · enquiries for 49 African countries

SELECT AND PREPARE YOUR ORDER

Select SDR together with service conditions

Catalogue references include SDR 6, 7.4, 9, 11 and 17.6, depending on the product. SDR relates outside diameter to wall thickness; it does not by itself establish suitability for a project. Supply operating temperature, pressure and the design specification.

Glass-fibre reinforced or single-layer pipe

Compare fibre-reinforced PPR and single-layer PPR using their data sheets, installation requirements and thermal expansion characteristics. Include the complete designation for a replacement. Fibre reinforcement does not remove the need to check diameter, SDR and joint compatibility.

Pipe price per metre or per length

An enquiry for 20, 25, 32, 40, 50 or 63 mm PPR pipe must specify the series and lengths as well as diameter; other sizes depend on the reference. Distinguish metres from numbers of straight lengths. Shipping lengths and packing are confirmed for the export load.

PRODUCT REFERENCES

Single-layer and fibre-reinforced PPR pipes

Review each product’s specifications and documents. The quotation confirms the reference, supply composition and availability.

108 references in this selection · page 1 of 5

EXPORT FROM TUNISIA

Sourcing for African countries.

MWB TRADING reviews your sourcing requirements from Tunisia for the 49 African countries shown below. Select your country in the paragraphs to fill in the destination on your enquiry.

West Africa

For single-layer and fibre-reinforced PPR pipes enquiries from customers in Benin, in Burkina Faso, in Cabo Verde, in Côte d’Ivoire, in Gambia, in Ghana, in Guinea, in Guinea-Bissau, in Liberia, in Mali, in Niger, in Nigeria, in Senegal, in Sierra Leone and in Togo, send your plumbing or water-supply bill of quantities with sizes and units. French schedules may describe drinking-water supply as adduction d’eau potable (AEP).

Central Africa

For single-layer and fibre-reinforced PPR pipes requirements in in Angola, in Cameroon, in the Republic of the Congo, in Gabon, in Equatorial Guinea, in the DR Congo, in the Central African Republic, in São Tomé and Príncipe and in Chad, distinguish water pipes, plumbing fittings and drainage. Include diameter, pressure and the final receiving location to prepare the offer.

East Africa

Enquiries for single-layer and fibre-reinforced PPR pipes for projects in Burundi, in Djibouti, in Eritrea, in Ethiopia, in Kenya, in Uganda, in Rwanda, in Somalia, in South Sudan and in Tanzania may use PPR pipes and fittings, uPVC pressure pipes or HDPE water pipes. State the required material and application, followed by each item’s specifications.

Southern Africa

For single-layer and fibre-reinforced PPR pipes delivery in South Africa, in Botswana, in Eswatini, in Lesotho, in Malawi, in Mozambique, in Namibia, in Zambia and in Zimbabwe, provide required lengths and packaging. In Mozambique, tubos e acessórios, PVC pressão and PEAD help match Portuguese schedules to English and French product descriptions.

Indian Ocean

For single-layer and fibre-reinforced PPR pipes requirements in in the Comoros, in Madagascar, in Mauritius and in the Seychelles, separate pipe metres, coils and fitting pieces. Rigid-pipe volume and the island destination are considered when assessing shipment.

North Africa

Projects requiring single-layer and fibre-reinforced PPR pipes in Egypt and in Sudan are assessed using the water and installation conditions, intended port and any inland route stated in the enquiry.

Availability, transport and documents are confirmed in your quotation.

YOUR EXPORT SOURCING

Products, preparation and transport in one quotation.

Dispatch from Tunisia and Incoterms

Depending on the project, sea dispatch is assessed from Radès with FOB Radès, CFR or CIF terms to the agreed port: Abidjan, Dakar, Lomé, Douala or another requested destination. Include an inland receiving location where required.

Availability and packaging

Straight pipe lengths, coils and fitting cartons are quoted separately. The offer specifies unit length, piece count, weight and volume. Rigid lengths are checked for container loading; no single length or coil size is assumed for every reference. Lead times separate availability, preparation and shipping.

Documents and required compliance

Commercial invoice, packing list and reference-specific technical data sheets support export preparation. Request and confirm declarations of conformity, certificates of origin or particular reports. Origin and applicable standards are those of the proposed product.

YOUR PRICE ENQUIRY

Your references and destination.

Choose a reference from the selection or describe your requirements. Technical fields are optional: provide the specifications you know and include your list in the notes.

Your enquiry is saved and then sent to contact@mwb.tn. You can continue on WhatsApp after confirmation.

For a diagram or detailed schedule, you can subsequently email the document with your enquiry reference.

Your business contact details

Your enquiry is saved on this website, then a notification is sent to contact@mwb.tn. WhatsApp is offered afterwards as an optional follow-up.

Before requesting your quotation.

Does glass-fibre reinforcement mean a higher pressure rating?

Not by itself. Compare service class, SDR, material and the manufacturer’s published ratings together. Selection depends on all these parameters.

Are all PPR pipes supplied in the same straight length?

Supplied length depends on the reference and confirmed packaging. Request both the number of lengths and length per piece so the total delivered metres can be checked.

What is the minimum order quantity?

State requirements in metres and straight lengths by diameter, SDR and construction. Minimum quantities and packaging depend on the references and are confirmed in the quotation.

How can I obtain wholesale or export prices?

Send a bill of quantities by material, diameter and required class, with quantities and receiving country. Specify whether pricing should be per metre, straight length, coil or fitting, together with the requested Incoterm.

What are the lead times, shipping and payment terms?

The offer separates availability, preparation and shipping. Dispatch from Radès and FOB, CFR or CIF terms are assessed for the project. Lead time, port, payment arrangements and price validity are confirmed in the quotation.

Which technical and drinking-water documents should I request?

Request product data sheets, market-specific conformity documents and reference-specific drinking-water approvals where required. The export file includes the invoice and packing list. Approval is not assumed for the whole range.

Can I request a sample or small order?

State the pipe or fitting, dimensions and intended trial. The feasibility of a sample, cut section or small order, including its cost and transport, is assessed before confirmation.

Does dispatch from Tunisia guarantee Tunisian origin?

Manufacturing origin is checked for each reference and is separate from the dispatch country. Certificates of origin and any customs preference must be confirmed against the product, applicable rules and destination.

MWB TRADING · AT YOUR SIDE

Your project starts here.

Let’s talk on WhatsApp: send us your product references, purchasing list or project details.

WhatsApp